C2000 Hastelloy® Slit Coils Stockholders, ASTM B575 Nickel Alloy C2000 Cold Rolled Sheets Manufactures, JIS NW 6200 Hastelloy® Alloy Chequer (Floor) Plate, Hastelloy C2000® Sheets Exporter,C-2000 Hastelloy Coils, Hastelloy® Grade C2000 Shim Sheets Exporters, ASME SB575 Hastelloy Alloy C-2000 Chequered Plates, Hastelloy® C2000 Perforated Sheet Suppliers, Hastelloy C-2000® Sheets, Hastelloy® C2000 Alloy Plates in Mumbai India.

Hastelloy® C2000 Flats, Hastelloy® Alloy C-2000 Slotted Hole Sheets, C2000 Hastelloy® Corrosion Resistant Plates Dealers in India, Hastelloy® C2000 Diamond Plate, Nickel Alloy C2000 Strip, Rolls Distributors, Hastelloy® C-2000 Coils Dealer, UNS N06200 Hastelloy Hot Rolled Plates Stockists, Type C-2000 Hastelloy Alloy Rings in Mumbai.

Renine Metalloys exports a wide range of Hastelloy Alloy C2000 Sheets Plates Coils, which comes at the expense of thermal stability and weldability. Mechanical ventilation is advisable for Hastelloy C2000 Plates and, under certain conditions such as a very confined space, is necessary during welding or cutting operations, or both, to prevent possible exposure to hazardous fumes, gases, or dust that may occur. The recommended start temperature for hot forging is 1232 Degree C (2250 Degree F) and the recommended finish temperature for Hastelloy C2000 Coils is 954 Degree C (1750 Degree F). Alloy C2000 Plates is unique among the versatile nickel-chromium-molybdenum materials in having a deliberate copper addition. In order to decrease the precipitation of second phase in the heat affected welding zones of Alloy C2000 Coils, high inter-pass temperature up to 93 Degree C is preferred. Nickel C2000 Sheets has good mechanical properties at high temperatures, useful for a wide range of aerospace and high temperature applications.

Hastelloy® C2000 Sheets & Plates
Hastelloy C2000 Sheets & Plates

The combination of Molybdenum and Copper in Nickel C2000 Plates provide excellent corrosion resistance to reducing media, while the high Chromium content gives good oxidizing resistance. Nickel C2000 Coils exhibit low penetration characteristics, therefore adequate joint access (weld angle) and minimal land are suggested. When engineers are creating equipment for Hastelloy UNS N06200 Sheets that can withstand the rigorous demands that chemical processing can put on a machine, it is important that all of the individual pieces within the machine can hold up over time.

ASTM B575 Hastelloy® Alloy C2000 Perforated Coils, Hastelloy® Alloy C2000 HR Plates, Hastelloy C-2000 Blanks, Hastelloy C-2000 Circles Suppliers in Mumbai, Hastelloy® C-2000 Foils Traders, ASME SB575 Hastelloy C2000 Embossed Sheets, C2000 Hastelloy Rings, Nickel Alloy C-2000 Chequered Plates Exporters, Alloy C2000 Strip Manufacturer, DIN 2.4675 Nickel Alloy CR Plate Stockyards.

Hastelloy C2000 Sheets, Plates & Coils Specification

Specifications : ASTM B575 / ASME SB575

Standard : ASTM, ASME and API

Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm

Thickness : 1.0mm – 200mm

Range : 5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 2500 mm Length.

Production : Hot-Rolled (HR) / Cold-Rolled (CR)

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Grade :Hastelloy C2000 Sheets, Plates & Coils UNS (N06200), DIN (2.4675)

Get Quote
JIS NW 6200 Hastelloy® Sheet, Plate, Coil Equivalent Indian Standard
STANDARD UNS WNR.
Hastelloy C2000 N06200 2.4675
ASTM B575 Hastelloy C-2000 Hot rolled Sheets, Plates & Coils Chemical Composition
Grade Ni Mo Cr Fe W Co Mn C V P Si
Hastelloy C2000 Remainder 15.0-17.0 14.5-16.5 4.0-7.0 3.0-4.5 2.5 max 1.0 max .01 max .35 max .04 max .08 max
ASME SB575 Hastelloy® Alloy C2000 Cold Rolled Sheets, Plates & Coils Mechanical Properties
Grade Tensile Strength Yield Strength Elongation at break
Hastelloy C2000 690 MPa 310 MPa 45%
Other Types of C-2000 Hastelloy® Sheets, Plates and Coils
  • Hastelloy® C2000 Shim Sheets
  • Hastelloy C-2000 Chequered Plates
  • Hastelloy® Alloy C2000 Coils
  • Hastelloy® C-2000 Perforated Sheets
  • Hastelloy Alloy C2000 Slit Coils

Hastelloy C2000® Sheets, Hastelloy® Alloy C2000 Plates, C-2000 Hastelloy® Coils, Hastelloy Alloy C2000 Sheet, Plates & Coils, Hastelloy C-2000 Hot Rolled Plates Dealers in Maharashtra, Hastelloy® Alloy C2000 Cold-Rolled Plates Stockists, Hastelloy® Grade C-2000 Sheet Plate & Coil Stockholders, ASTM B575 Hastelloy C2000 Shim Sheets Suppliers, Hastelloy C2000 - UNS N06200 Common Trade Names ( Hastelloy C-2000®, Hastelloy® C2000, Alloy C2000), Hastelloy® C-2000 Cold Rolled Sheets, Alloy C2000 Sheets, Alloy C2000 Plate, Alloy C-2000 Coils, UNS N06200 Hastelloy® Alloy Slotted Hole Sheets, DIN 2.4675 Hastelloy Flats, Cheap Hastelloy® C2000 Sheets, Plates, Coils, C2000 Hastelloy Alloy Chequered Plates, Hastelloy® Alloy C-2000 SB575 Rings Wholesaler in Charni Road, ASME SB575 Nickel Alloy C2000 CR Sheets Manufactures, Hastelloy C2000 Perforated Sheets, Hastelloy C-2000 Rings Traders in C.P.Tank Road, Hastelloy® Alloy C2000 Corrosion Resistant Plates, Hastelloy C2000 Rolled Floor Plates Stockists in Mumbai, Nickel Alloy JIS NW 6200 Hot Rolled Coils, Hastelloy® Alloy C-2000 HR Plates, Buy Grade C2000 Hastelloy® Strip, Rolls, Hastelloy Alloy C2000 Foils, Hastelloy C-2000 Slitting Coils, Hastelloy® C-2000 Cold Rolled Coil Exporters in India, Hastelloy® C2000 CR Plates, Hastelloy Alloy C2000 Diamond Plates Stockyards, ASTM B575 Hastelloy C2000 Embossed Sheet, ASME SB575 Hastelloy® C-2000 Perforated Coils Manufactures in Mumbai, Nickel Alloy C2000 Foils, Hastelloy® Alloy C2000 HR Coils, Hastelloy C-2000 Circles, Hastelloy Alloy C2000 Rings, Hastelloy C2000 Blanks, Hastelloy® Alloy C-2000 Flats, Nickel Alloy C2000 Profile, C2000 Hastelloy® Rolls, Hastelloy Alloy C-2000 B575 Slit Coils, C2000 Hastelloy® Hard Tempered Sheet & Coil, Hastelloy® Alloy C-2000 Industrial Coils Exporters in Mumbai India.

We are Suppliers and Exporters of Hastelloy C2000 Sheets, Plates & Coils in Cities Like

Gimhae-si, Jamshedpur, Kolkata, Baroda, Courbevoie, Visakhapatnam, Sharjah, Jakarta, Indore, Sydney, Houston, Caracas, Milan, Moscow, Petaling Jaya, Geoje-si, Pune, Ho Chi Minh City, Lahore, Mexico City, London, La Victoria, Turkey, Karachi, Ulsan, Brisbane, Chennai, Calgary, Vadodara, Colombo, Haryana, Australia, Secunderabad, Dallas, Nashik, Chandigarh, Toronto, Doha, Ludhiana, Bangkok, Howrah, Santiago, Coimbatore, Dubai, Cairo, Hanoi, Kuwait City, Nagpur, Gurgaon, Kuala Lumpur, Rio de Janeiro, New Delhi, Vung Tau, Jeddah, Abu Dhabi, Riyadh, Bengaluru, Pimpri-Chinchwad, Hong Kong, Jaipur, Atyrau, New York, Bogota, Istanbul, Muscat, Bhopal, Manama, Algiers, Ahvaz, Ahmedabad, Hyderabad, Kanpur, Chiyoda, Aberdeen, Ranchi, Thiruvananthapuram, Surat, Montreal, Faridabad, Navi Mumbai, Thane, Tehran, Madrid, Lagos, Perth, Noida, Rajkot, Granada, Mumbai, Al Khobar, Dammam, Ernakulam, Seoul, Busan, Port-of-Spain, Edmonton, Los Angeles, Al Jubail, Singapore.

We are Suppliers and Exporters of Hastelloy® Alloy C-2000 Sheets, Plates & Coils in Countries Like

Austria, Iran, Russia, Ukraine, Kenya, Mexico, Zimbabwe, brazil, New Zealand, Puerto Rico, Spain, Algeria, Gabon, Poland, Belarus, Taiwan, Tibet, Venezuela, Portugal, Gambia, Kuwait, Poland, Yemen, Netherlands, Czech Republic, cyprus, Trinidad & Tobago,Tunisia, Costa Rica, Thailand, Bulgaria, Sri Lanka, Nepal, United States, Chile, Philippines, Romania, Estonia, Colombia, Hungary, Azerbaijan, Ghana, Singapore, Jordan, Finland, Egypt, Malaysia, Greece, Japan, Mexico, Kazakhstan, Nigeria, Germany, Croatia, Argentina, Saudi Arabia, Morocco, Serbia, South Africa, Ecuador, Israel, Ireland, Mongolia, Hong Kong, Afghanistan, Iran, Bolivia, Indonesia, United Kingdom, Macau, Slovakia, Italy, South Korea, China, Namibia, Denmark, Sweden, India, Australia, Vietnam, Oman, Bangladesh, Peru, mexico, srilanka, thailand, malaysia, Brazil, Bahrain, Lebanon, Turkey, Norway, France, Lithuania, Libya, Nigeria, Bhutan, Belgium, Chile, Switzerland, Qatar, United Arab Emirates, Canada.