Hastelloy C276 Forgings,Because it doesn't develop grain boundary precipitates in weld heat-affected zones, alloy C-276 is suitable for the majority of chemical process applications in the as-welded state. But if an attack on a C-276 alloy weld joint occurs, as it might in some conditions, C-22 weld filler metal should be taken into consideration. An extensive range of chemical process conditions is well-resisted by the alloy. These Hastelloy Alloy C276 Forgings are used for different welding applications, including other nickel chromium molybdenum alloys and stainless steels, and weld overlay or cladding of steels. The same is true for the nickel alloy C276 forgings used in the paper manufacturing business., which uses chemicals to treat their products.

Nickel Alloy UNS N10276 ASTM B564 Forgings, C276 Hastelloy Forgings, C276 Hastelloy Forgings, ASME SB564 Hastelloy C-276 Die Forging, Hastelloy C276 Forgings, Hastelloy C-276® Forgings, Nickelvac® HC-276 Forgings, Nicrofer® 5716 Forgings, Hastelloy Alloy C276 Cold Forging, UNS N10276 Alloy C276 Forgings, Alloy C276 Forged Rolled Ring Suppliers, ASME 16.11 Hastelloy C276 Forgings, Hastelloy® C-276 SB564 Upset Forging Stockists, Hastelloy C276 Closed Die Forging, Nickel Alloy C276 Machined Hot Forging Dealer in Mumbai, India.

While cold work does not usually affect the resistance of these Nickel Alloy C276 Forgings to general corrosion and chloride-induced pitting and crevice attack, it can affect resistance to stress corrosion cracking. Annealing of Hastelloy C276 Forgings after working is advised. It should be performed at a temperature between 2050 Degrees F and 2150 Degrees F, followed by a rapid quench in a protective atmosphere or an agitated reducing quench bath.

Hastelloy® C276 Circle Forgings, Hastelloy Alloy C-276 Bars Forgings Wholesaler, UNS N10276 Forging, Hastelloy 2.4819 Forgings, UNS N10276 Forging, High Temperature Hastelloy® Alloy C-276 Forging, Hastelloy C276® Forging Flanges, Hastelloy C-276 Seamless Rings Forging Suppliers, Hastelloy Alloy C276 Forgings, Hastelloy 2.4819 Forgings, Hastelloy C276 Forging Grade, DIN 2.4819 Hastelloy® Forged Blocks Exporters, UNS N10276 Hastelloy Sprockets Forging.

Hastelloy C276 Forgings

Hastelloy C276 Forgings

Nickel & cobalt base corrosion, temperature, and wear-resistant alloys, such as these Hastelloy Alloy C276 Forgings, are classified as moderate to difficult when machining. However, it should be emphasized that these alloys can be machined using conventional production methods at satisfactory rates. Hastelloy UNS N10276 Forgings is used for Pharmaceutical and food processing equipment, Industrial and municipal waste treatment, Pulp and paper production, etc. Since these Hastelloy DIN 2.4819 Forgings are prone to work–hardening, only low cutting speeds should be used, and the cutting tool should be engaged at all times.

Hastelloy DIN 2.4819 Forging, ASTM B564 Nickelvac® HC-276 Hand Forgings Suppliers, Hastelloy® C276 Closed Die Forging, Hastelloy® Alloy C-276 Shafts Forging Traders, ASTM B564 C-276 Hastelloy Forgings, Hastelloy C276 Gear Blanks Forgings, Hastelloy® C-276 Circular Plates Forgings Exporters, Hastelloy® C-276 Forged Discs Forgings, Nicrofer® 5716 Open Die Forging.

What is Hastelloy C276 and what are its properties?

Hastelloy C276 is a nickel-chromium-molybdenum alloy known for its exceptional corrosion resistance in a wide range of harsh environments. UNS N10276 Hastelloy Forgings is highly resistant to pitting, crevice corrosion and stress corrosion cracking, and has good resistance to reducing and oxidizing conditions.

What are the common applications of Hastelloy C276 Forgings?

Hastelloy Alloy C276 Forgings are commonly used in chemical processing, pollution control, and waste treatment industries. They are also used in the aerospace and power generation industries because of its excellent corrosion resistance, particularly in severe environments.

What is the maximum temperature range for Hastelloy C276 forgings?

C276 Hastelloy Forgings can withstand temperatures of up to 1300°F (704°C) in non-oxidizing environments, and 1000°F (538°C) in oxidizing environments.

Hastelloy Alloy C276 Forgings Specification

Specifications ASTM B564 / ASME SB564

Flat bar blocks up to 27" width and 15,000 lbs.

Cylinders and sleeves up to 50" maximum O.D. and 65" maximum length

Discs and hubs up to 50" diameter and 20,000 lbs./p>

Rolled, hand forged or mandrel forged rings up to 84" maximum O.D. and 40" maximum length

Rounds, shafts and step shafts up to 144" maximum length and 20,000 lbs.

Grades Hastelloy C276 Forging UNS (N10276), DIN (2.4819)

Get Quote

Hastelloy C276® Forgings Equivalent Indian Standard

Hastelloy C276 N10276 2.4819 - NiMo16Cr15W NW 0276 ЭП760 ХН65МВУ

ASTM B564 Hastelloy® C276 Forgings Chemical Composition

Grade Ni C Mo Mn Si Fe P S Co Cr W V
Hastelloy C276 Balance 0.01 max 15–17 1.0 max 0.08 max 4–7 0.04 max 0.03 max 2.5 max 14.5–16.5 3–4.5 0.35 max

ASME SB564 Hastelloy Alloy C-276 Forgings Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %

Other Types of Hastelloy® Alloy C276 Forgings

  • Hastelloy C276 Block Forgings
  • C-276 Hastelloy Alloy Circle Forgings
  • Hastelloy® C276 Shaft Forgings
  • Hastelloy® Alloy C-276 Ring Forgings
  • Hastelloy C276 Alloy Forgings

Hastelloy C-276 Forgings, High Temperature Alloy C276 Forgings, Hastelloy® C-276 Forgings, Nickelvac® HC-276 Forgings Importers, Nicrofer® 5716 Forgings, Cheap Hastelloy C-276® Seamless Rolled Ring Forgings, ASTM B564 Hastelloy Alloy C276 Flat Bars Forgings, UNS N10276 Nickel Alloy Forgings, DIN 2.4819 Hastelloy® Alloy Forgings, ASTM B564 Hastelloy C276 Hub Forgings, ASME SB564 Hastelloy Alloy C-276® Blocks Forgings Exporters in Mumbai, Nickelvac® HC-276 Circles Forgings Traders, Nicrofer® 5716 Circular Plates Forging Suppliers, Hastelloy® C-276 Forged Ring Forging Stockholders, Hastelloy Alloy C276 Forged Discs Forgings, Hastelloy® Alloy C-276 Custom Forged Shapes Forgings, Hastelloy C276 Gear Blanks Forgings Dealers Maharashtra, Hastelloy® C-276 Shafts Forgings, Hastelloy C276 Hollow Bars Forgings, UNS N10276 Hastelloy Alloy Flanges Forgings, DIN 2.4819 Hastelloy® Sleeves Forging, Nickelvac® HC-276 Hooks Forgings, ASTM B564 Nicrofer® 5716 Forged Cylinders Forgings, Hastelloy C276® Blind Hole Cylinders Forgings, Hastelloy C276 Forging sleeves, C276 Hastelloy Forging tube sheets, Hastelloy® C276 SB564 forging pipes, Hastelloy® Alloy C-276 forging bushings, Alloy C-276 B564 Forged disks (edited), Hastelloy® C276 Forging Parts, Hastelloy C-276 Forging Billets, ASME SB564 Hastelloy C276 Open Die Forging Manufactures in India, Hastelloy Alloy C276 Closed Die Forging, Hastelloy C-276 Forging Rolled Rings, Hastelloy® Alloy C276 Upset Forgings, Hastelloy C276 Machined Hot Forgings, Hastelloy® C-276 Hand Forgings, Hastelloy C276® Forgings Bars.

Trade Names and Owners of Nickel Alloys

HASTELLOY is a registered trade name of Haynes Intl.
INCOLOY, INCONEL, MONEL and NIMONIC are registered trade names of the INCO family of companies.
INVAR is a registered trademark of Imphy S.A.
MU-METAL is a registered trademark of Telcon Metals Ltd
NICORROS and NICROFER are registered tradenames of Krupp UM GmbH
RENE 41® is a Registered Trade Mark of General Electric Inc.
WASPALOY® is a Registered Trademark of United Technologies Corp.
NITRONIC® is a registered Trade Mark of AK Steel Corporation
ZERON® is a registered trademark of RA Materials

We are Suppliers and Exporters of Hastelloy C-276 Forgings in Cities Like

Port-of-Spain, Ahvaz, Houston, Ranchi, Ernakulam, Lahore, Jaipur, Dubai, Moscow, Kolkata, Gimhae-si, Chennai, Noida, Chiyoda, Gurgaon, Mexico City, Hyderabad, Kanpur, Dallas, Seoul, Ho Chi Minh City, Secunderabad, Al Khobar, Navi Mumbai, Busan, Vadodara, Bogota, Kuala Lumpur, Hong Kong, Aberdeen, Toronto, New York, Howrah, Al Jubail, Vung Tau, Indore, Jamshedpur, Caracas, London, Sydney, Nagpur, Sharjah, Ulsan, Istanbul, Turkey, Brisbane, Madrid, Perth, La Victoria, Atyrau, Faridabad, Pimpri-Chinchwad, Karachi, Jeddah, Mumbai, Nashik, Hanoi, Cairo, Santiago, Calgary, Rajkot, Ahmedabad, Australia, Rio de Janeiro, Thane, Colombo, Kuwait City, Ludhiana, Pune, Doha, Granada, Petaling Jaya, Baroda, Chandigarh, New Delhi, Bhopal, Geoje-si, Visakhapatnam, Manama, Haryana, Riyadh, Bangkok, Algiers, Los Angeles, Milan, Thiruvananthapuram, Bengaluru, Singapore, Surat, Tehran, Abu Dhabi, Muscat, Montreal, Coimbatore, Lagos, Dammam, Jakarta, Courbevoie, Edmonton.

We are Suppliers and Exporters of Hastelloy® Alloy C276 Forgings in Countries Like

Brazil, Zimbabwe, Afghanistan, Lebanon, Belgium, Macau, Ecuador, Spain, Czech Republic, Taiwan, Qatar, Poland, brazil, Turkey, Bolivia, Israel, Bhutan, Tibet, Saudi Arabia, Austria, Egypt, Libya, Costa Rica, Sri Lanka, Bulgaria, Iran, Serbia, Oman, South Korea, India, Kuwait, Vietnam, United Kingdom, Italy, Colombia, Portugal, Jordan, Switzerland, Singapore, New Zealand, China, Norway, Greece, Argentina, Azerbaijan, Iran, Hungary, Namibia, Germany, Nigeria, Belarus, Russia, Algeria, Indonesia, Kazakhstan, Mexico, Hong Kong, Mongolia, France, Malaysia, Philippines, Ghana, Sweden, Ukraine, Lithuania, Bangladesh, Canada, cyprus, Chile, Peru, Puerto Rico, Japan, Netherlands, Ireland, Gabon, mexico, srilanka, thailand, malaysia, Bahrain, Nigeria, Morocco, Yemen, Romania, Trinidad & Tobago,Tunisia, Estonia, Croatia, Australia, South Africa, Gambia, Venezuela, Poland, Thailand, Kenya, United Arab Emirates, Nepal, Mexico, Chile, United States, Denmark, Slovakia, Finland.