Monel® Grade K500 Shim Sheets Exporters, ASME SB127 Monel Alloy K500 Chequered Plates, Monel Coils, Monel® K500 Perforated Sheet Suppliers in Mumbai India, GOST МНЖМц 28-2,5-1,5 Monel® Alloy Chequer (Floor) Plate, ASTM B127 Nickel Alloy K500 Cold Rolled Sheets Manufactures, Monel Sheets, Monel K500® Sheets Exporter, K500 Monel® Slit Coils Stockholders, Monel® Alloy Plates.

UNS N05500 Monel Hot Rolled Plates Stockists, Type K500 Monel Alloy Rings, Monel® Alloy K500 Slotted Hole Sheets, Nickelvac® K500 Coils Dealer, Monel® K500 Flats, K500 Monel® Corrosion Resistant Plates Dealers in India, Rolls Distributors in Mumbai, Nickel Alloy K500 Strip, Monel® K500 Diamond Plate.

Monel K500 Plates is a nickel-copper alloy which combines the excellent corrosion resistance of Alloy 400 with higher strength and hardness obtained through the addition of aluminum and titanium to the nickel-copper base. Monel K500 Coils is often used for springs - resistance to a variety of corrosive media. Renine Metalloys is a well-known supplier of our Alloy K500 Sheets, which has enhanced strength and hardness after precipitation hardening when compared with Monel 400 Sheets. Welding of Alloy K500 Plates is best accomplished by the gas-tungsten-arc welding process. Alloy K500 Coils has been establishing to have remarkably first-rate dimensional steadiness, both in extended-time of exposure inspects and also in cyclic checks. Monel K500 Slatting Coils retains the excellent corrosion resistant characteristics of Monel 400 Plates. For best aging rejoinder and supreme smoothness, Monel K500 Perforated Coils is significant to get actual water satiate from the reheating heat devoid of postponement.

Monel® K500 Sheets & Plates
Monel K500 Sheets & Plates

Monel K500 Slatting Sheets should be water quenched from a temperature no lower than 1450 Degree F after hot working. Monel K500 Perforated Sheets is often used in Oil & Gas industry pump shafts, instrumentation, valve stems, drill collars, etc. Monel K500 Slatting Plates is also known for its ease of fabrication compared to other super-alloys. Monel K500 Perforated Plates has a greater tendency toward stress-corrosion cracking in some environments. As such, Monel UNS N05500 Plates has increased strength with the excellent resistance to sea water corrosion.

Nickel Alloy K500 Chequered Plates Exporters, ASME SB127 Monel K500 Embossed Sheets, K500 Monel Rings, Monel® Alloy K500 HR Plates, Monel® K500 Foils Traders, Monel K500 Blanks, Monel K500 Circles Suppliers in Mumbai, DIN 2.4375 Nickel Alloy CR Plate Stockyards, Ferrochronin® K500 Strip Manufacturer, ASTM B127 Monel® Alloy K500 Perforated Coils.

Monel K500 Sheets, Plates & Coils Specification

Specifications : ASTM B127 / ASME SB127

Standard : ASTM, ASME and API

Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x K5000 mm

Thickness : 1.0mm – 200mm

Range : 5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 2500 mm Length.

Production : Hot-Rolled (HR) / Cold-Rolled (CR)

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Grade : Monel K500 Sheets, Plates & Coils UNS (N05500), DIN (2.4375)

Get Quote
GOST МНЖМц 28-2,5-1,5 K500 Monel® Sheet, Plate, Coil Equivalent Indian Standard
STANDARD UNS WNR.
Monel K500 N05500 2.4375
ASTM B127 Monel K500 Hot rolled Sheets, Plates & Coils Chemical Composition
Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min
ASME SB127 Monel® Alloy K500 Cold Rolled Sheets, Plates & Coils Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 115000 , MPa – 790 Psi – 160000 , MPa – 1100 20 %
Other Types of K500 Monel® Sheets, Plates and Coils
  • Monel® K500 Shim Sheets
  • Monel K500 Chequered Plates
  • Monel® Alloy K500 Coils
  • Monel® K500 Perforated Sheets
  • Monel Alloy K500 Slit Coils

Monel K500 Perforated Sheets, Monel® Grade K500 Sheet Plate & Coil Stockholders, Alloy K500 Sheets, DIN 2.4375 Monel Flats, ASTM B127 Monel K500 Shim Sheets Suppliers, Monel® K500 Cold Rolled Sheets, K500 Monel Alloy Chequered Plates, Cheap Monel® K500 Sheets, Ferrochronin® K500), Monel Sheets, Monel® Alloy K500 SB127 Rings Wholesaler in Charni Road, UNS N05500 Monel® Alloy Slotted Hole Sheets, Monel® Alloy K500 Corrosion Resistant Plates,, Monel K500 Rings Traders in C.P.Tank Road, Monel® Alloy K500 Cold-Rolled Plates Stockists, Monel K500 Hot Rolled Plates Dealers in Maharashtra, ASME SB127 Nickel Alloy K500 CR Sheets Manufactures, Plates & Coils, Coils, Monel K500 - UNS N05500 Common Trade Names ( Monel K500®, Plates, Alloy K500 Coils, Nickelvac® K500, Monel® Alloy Plates, Alloy K500 Plate, Monel Alloy K500 Sheet, Monel® Coils, Monel K500 Rolled Floor Plates Stockists in Mumbai, Nickel Alloy GOST МНЖМц 28-2,5-1,5 Hot Rolled Coils, K500 Monel® Hard Tempered Sheet & Coil, Monel® Alloy K500 Industrial Coils Exporters, Monel Alloy K500 Rings, Monel K500 Blanks, Monel K500 Circles, Monel® K500 CR Plates, ASTM B127 Monel Embossed Sheet, Monel K500 Slitting Coils, Monel® Alloy K500 HR Plates, Monel® K500 Cold Rolled Coil Exporters in India, Monel Alloy K500 B127 Slit Coils,, ASME SB127 Monel® K500 Perforated Coils Manufactures in Mumbai, Nickel Alloy K500 Profile, K500 Monel® Rolls, Monel Alloy K500 Foils, Rolls, Monel® Alloy K500 Flats, Monel Alloy K500 Diamond Plates Stockyards, Nickel Alloy K500 Foils, Monel® Alloy K500 HR Coils, Buy Grade K500 Monel® Strip in Mumbai India.

We are Suppliers and Exporters of Monel K500 Sheets, Plates & Coils in Cities Like

Noida, Kuala Lumpur, Hyderabad, Petaling Jaya, Bengaluru, Lagos, Doha, Jeddah, Coimbatore, Ahvaz, Jakarta, Milan, Aberdeen, Colombo, Muscat, Bangkok, Chennai, Hanoi, Granada, Los Angeles, Edmonton, Courbevoie, Chiyoda, Secunderabad, Pimpri-Chinchwad, Sydney, Vung Tau, Gurgaon, Mumbai, Nagpur, New York, Atyrau, Kuwait City, Ludhiana, Singapore, Howrah, Bogota, Al Khobar, Haryana, Baroda, Melbourne, Geoje-si, Dallas, Calgary, Jaipur, Pune, Algiers, Houston, Busan, New Delhi, Thiruvananthapuram, Visakhapatnam, Sharjah, Riyadh, Perth, Navi Mumbai, Ankara, London, Rajkot, Hong Kong, Ahmedabad, Rio de Janeiro, Ranchi, Jamshedpur, Toronto, Gimhae-si, Al Jubail, Bhopal, Moscow, Seoul, Nashik, Port-of-Spain, Tehran, Chandigarh, Kanpur, Dubai, Caracas, Indore, Istanbul, Abu Dhabi, Ulsan, Dammam, Madrid, Montreal, Manama, Lahore, Surat, Ho Chi Minh City, Faridabad, Cairo, La Victoria, Thane, Brisbane, Kolkata, Vadodara, Ernakulam, Santiago, Mexico City, Karachi.

We are Suppliers and Exporters of Monel® Alloy K500 Sheets, Plates & Coils in Countries Like

Singapore, Thailand, Canada, France, Gabon, Japan, Egypt, Yemen, Netherlands, Hungary, South Africa, Ghana, United Arab Emirates, India, Spain, Turkey, Peru, Algeria, Afghanistan, Colombia, Serbia, Taiwan, Costa Rica, Switzerland, Slovakia, Morocco, Russia, Namibia, Ireland, Iran, Mexico, Bolivia, Ukraine, New Zealand, Trinidad & Tobago,Tunisia, Lebanon, Hong Kong, Gambia, Bangladesh, Belarus, Estonia, Chile, Kenya, Iraq, Romania, Brazil, Pakistan, United Kingdom, Austria, Belgium, Kuwait, Indonesia, Croatia, Greece, Australia, Jordan, Denmark, Puerto Rico, Saudi Arabia, Italy, Bahrain, Bulgaria, Mongolia, Philippines, Kazakhstan, Angola, Macau, Chile, Argentina, Portugal, Israel, Malaysia, China, United States, Lithuania, Finland, Qatar, Venezuela, Azerbaijan, Sri Lanka, Iran, Vietnam, Sweden, Ecuador, Zimbabwe, Oman, Libya, Norway, Nigeria, Poland, Bhutan, Germany, Nepal, Mexico, Poland, South Korea, Czech Republic, Nigeria, Tibet.