SS 17-4PH Fasteners in Florida
SS 17-4PH Fasteners in Florida, ASME SA193 SS 17-4PH Fasteners Stockist in Florida, SS 17-4PH Fasteners Supplier in Florida.
Renine Metalloys is a leading SS 17-4PH Fasteners supplier and exporter in Florida, trusted for reliable service and top-grade products. SS 17-4PH Fasteners are made from a high-strength stainless steel alloy known for its excellent mechanical properties and corrosion resistance. This material consists of chromium, nickel, and copper, with added niobium to improve strength. These fasteners meet international standards such as ASTM, DIN, BS, GB, and IS. Available in a range of types, including bolts, nuts, screws, washers, studs, anchors, and sockets in custom sizes to fit your specific needs.
Our fasteners are available in 3 mm to 200 mm sizes. Finishes on the surface are polished, mirror, or electroplated for increased durability and aesthetic appeal. Produced according to ASTM A193, A194 and ASME SA193, SA194 specifications. Following heat treatment, stainless steel 17-4PH Fasteners possess a yield strength of between 1,100 and 1,300 MPa. They remain strong and stable even when subjected to temperatures up to 572°F (300°C).
Due to these characteristics, SS 17-4PH Fasteners are used in the aerospace, marine, power generation and chemical processing sectors. They withstand heavy loads and resist wear in severe conditions. Their strength, resistance to temperature, and protection against corrosion make them a reliable among different industries.
We are ISO certified and inspect each fastener thoroughly prior to despatch. Tests such as hardness tests, tensile tests, visual tests, impact tests, shell pressure tests, and entire material checks are performed. In every shipment, complete inspection data and reports are given. Fast delivery and prompt customer service enable us reliable SS 17-4PH Fasteners supplier in Florida.
SS 17-4PH Fasteners Specification
| Specifications | Details |
| Standard | ASTM A 193 / ASME SA 193 |
| Size | M3 – M100 | 3/6″ – 4″ | Custom Sizes |
| Fasteners Length | 3 mm – 200 mm | Custom Sizes |
| Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Manufacturing Process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
Reach Out – We’re Happy to Help!
Feel Free to connect with us. Our team is ready for a handful of support
Types of SS 17-4PH Fasteners in Florida
Bolt
SS 17-4PH Bolt in Florida
Nuts
SS 17-4PH Nut in Florida
Screw
SS 17-4PH Screws in Florida
Washer
SS 17-4PH washer in Florida
Stud Bolt
SS 17-4PH Stud Bolts in Florida
Anchor Bolt
SS 17-4PH Anchor Bolts in Florida
SS 17-4PH Fasteners Equivalent Grades in Florida
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| SS 17-4 PH | 1.4542 | S17400 |
SS 17-4PH Fasteners Chemical Composition in Florida
| Grade | C | Cb+Ta | Cr | Cu | Fe | Mn | Ni | P | S | Si |
|---|---|---|---|---|---|---|---|---|---|---|
| SS 17-4 PH | 0.07 max | 0.15–0.45 | 15.00–17.50 | 3.00–5.00 | Bal | 1.0 max | 3.0–5.0 | 0.040 max | 0.030 max | 1.0 max |
SS 17-4PH Fasteners Mechanical Properties in Florida
| Grade | Tensile Strength | Yield Strength 0.2% | Elongation (%) | Hardness (Rockwell) Max |
|---|---|---|---|---|
| SS 17-4 PH | 170,000 psi (1172 MPa) | 140,000 psi (965 MPa) | 6% | 38 HRC |